Replacing the Battery in the Nexkey Core

Replacing the Battery in the Nexkey Core


Info
Battery can be changed with the Core installed

Before getting started, you will need:

Torx T6 screwdriver



(1) ER14250 1/2 AA battery

   

Instructions

  1. Remove security screw from the Core handle

  1. Slide off handle (may be harder if O-rings are installed)
  2. Gently pull back retaining ring
  3. Slide old battery out and install new battery with the (+) face-down into the Core
  4. Reinstall retaining ring, ensure the screw holes align, slide on handle then reinstall security screw

  1. LED will turn on when handle is reinstalled. Once it turns off tap, the front to connect to your phone


Update Last Battery Change Setting  in the Nexkey App or Portal


 

By performing this step, Nexkey will send a email when it's time to replace the battery again.
  1. Select Keys tab
  2. Select the lock you just changed the battery in
  3. Select Settings and scroll down to the bottom
  4. Select Last Battery Change
  5. Select date of battery change



    • Related Articles

    • Replacing the Battery in the Nexkey Solo

      The battery can be changed with the Solo installed, though we have found it is easier when removed from the door frame. Before getting started, you will need: Torx T6 screwdriver (2) ER14250 1/2 AA batteries Instructions Open your door to expose the ...

    • Power Cycling all Nexkey Products

      Nexkey Core Before getting started, you will need: Torx T6 screwdriver Instructions Remove security screw from the Core handle Slide off handle (may be harder if O-rings are installed) Gently pull back retaining ring Slide old battery out and install ...

    • Managing Power Issues with the Nexkey Controller

      By following these steps, most power issues with Nexkey products can be identified and resolved quickly. Ensuring stable, clean power is key to keeping your access control system running smoothly. Step 1: Confirm voltage and power cycle Should there ...

    • Managing Groups in the Nexkey App

      Enabling Groups To set up Groups in the Nexkey app, you first need to enable it. To do this, go to the MORE section in the app and select Advanced features. Toggle Groups ON. Groups will now appear at the top of the MORE tab. Creating a Group Now ...

    • Issues Unlocking Nexkey Controller

      Please read through the scenarios below to determine the issue that suits you best. Issue: The Nexkey Controller doesn't appear in my app as I approach the door Steps to resolve: Go to the KEYS tab in the Nexkey app and make sure that you have access ...