Replacing the Battery in the Nexkey Solo

Replacing the Battery in the Nexkey Solo

The battery can be changed with the Solo installed, though we have found it is easier when removed from the door frame.

Before getting started, you will need:


Torx T6 screwdriver





(2) ER14250 1/2 AA batteries

   

Instructions

  1. Open your door to expose the Nexkey Solo. If your battery is dead, then you'll need your physical key to manually unlock the door.
  2. Remove the security screw on the black battery cover inside the Nexkey Solo


  1. Remove the battery cover, then remove the two batteries by hand.
  2. Install new batteries with the (+) terminals pointing towards each other, then reinstall the battery cover

Update Last Battery Change Setting in the Nexkey App or Portal


               

By performing this step, Nexkey will send a email when it's time to replace the battery again.
  1. Select Keys tab
  2. Select the lock you just changed the battery in
  3. Select Settings and scroll down to the bottom
  4. Select Last Battery Change
  5. Select date of battery change

    • Related Articles

    • Replacing the Battery in the Nexkey Core

      Battery can be changed with the Core installed Before getting started, you will need: Torx T6 screwdriver (1) ER14250 1/2 AA battery Instructions Remove security screw from the Core handle Slide off handle (may be harder if O-rings are installed) ...

    • Power Cycling all Nexkey Products

      Nexkey Core Before getting started, you will need: Torx T6 screwdriver Instructions Remove security screw from the Core handle Slide off handle (may be harder if O-rings are installed) Gently pull back retaining ring Slide old battery out and install ...

    • Managing Groups in the Nexkey App

      Enabling Groups To set up Groups in the Nexkey app, you first need to enable it. To do this, go to the MORE section in the app and select Advanced features. Toggle Groups ON. Groups will now appear at the top of the MORE tab. Creating a Group Now ...

    • Understanding Errors in the Nexkey App

      Error 200 when Remotely Unlocking a Door(Nexkey Controller Only) Details: When attempting to remotely unlock a Nexkey Controller, you receive Error 200 or Error 210. Resolution: Should this error occur on your end, this means that the Nexkey ...

    • Connecting the Nexkey Controller to Wi-Fi

      Connecting the Nexkey Controller to Wi-Fi enables remote unlocking, text keys and business hours functionality. Please note that the Controller will only connect to a 2.4Ghz network. Before getting started, make sure that your Nexkey Controller is ...